First Impressions: Wilson ETM 45 HD/+P Magazine

Wilson Combat has been innovating the 1911 world for decades, and hasn’t stopped yet. They continue to make some of the best high end 1911 pistols on the market, and they’ve been making 1911 magazines since before many of our readers were born. Recently, they’ve been changing the 1911 market by introducing flat wire spring technology in their 1911 recoil springs, which reportedly increase the maintenance cycle by up to 10 times. So if they work so well in recoil springs, why not put them in a magazine?

A common complaint regarding many 8-round magazines is the limited spring life. Use them heavily or leave them loaded for a long time and they quickly lose lift, resulting in malfunctions. The new ETM HD magazine addresses this with a longer tube to fit a longer spring, and a flat wire spring that is advertised to provide 25% more lift than standard springs. Like all their products, the magazine is guaranteed for life by Wilson Combat. Continue reading

First Look: 87 Industries Pinned Gas Block Kit

87 Industries Gas Block Kit comes complete with the gas block, set screw, cross pin, gas tube pin, and hex wrench.

Our dedicated followers know that a pinned gas block is cheap insurance that your gas system won’t leak or come apart at the worst possible moment. Popular extended hand guard systems don’t make it easy to check if your set screws or gas block is loose, and a cross pin is the most reliable way to ensure your gas block is snug. However, for end users that don’t have access to custom fixturing or a mill, pinning a gas block on your own build can be a hassle. Enter 87 Industries.

They offer a Pinned Gas Block Kit which is set up so that the end user can install a pinned gas block with nothing more than a vise and a drill press. The owner tells me that it can even be done with a steady hand and a hand drill in a pinch. The kit includes a drill bit, tapered cross pin that eliminates the need for reaming, Loctite 262, set screw to hold the block in place during drilling, and allen head wrench. The gas block is made of very tough 17-4 Stainless finished with black oxide. The block works with .750″ diameter barrels.

I will be installing one of these with a drill press on a future build, so stay tuned.

Made In The USA: Two AR Related Issues Solved

 

I recently completed a stripped Gen 2 Noveske Chainsaw Grade lower and topped it off with a BCM mid-length upper with a Centurion Arms rail.  For my optic I chose both a Trijicon ACOG (the compact 1.5 X 16S, see here) or a short base EOTech (see here).  A good looking, well set up AR with optics, Made In The USA!  For white light, I mounted a Surefire X300 Ultra.   Fits and looks good, and is lightweight  . . . I even like the way the activation switches work, except for one issue, see below.  (Prior Jerry Jones MSW post about the Surefire is here).

Continue reading

SureFire’s Sonic Ear Defenders EP-3 hearing protection

SF’s EP3 sonic ear defenders. You can leave the channel open to hear what is going on around you or you can plug the channel for the best hearing protection. The case and retention cord are included.

I have been spending time this year using the Surefire’s hearing protection. Thus far, I’m pretty happy with them.

The EP-3 is the two-flange model with an opening that can be used either open or closed. The design is such that it assists in blocking noise over 85db. SF says they have a 24db reduction rating with the plug in place. The canal will accept earpiece tubes that work with most the portable radios in use with public safety and government. They also have a retention cord for hanging around your neck. Continue reading

Training with Frank Proctor

I had the distinct pleasure of traveling to the Way Of The Gun training facility recently to train with Frank Proctor.  Frank operates his facility out of Eastaboga, Alabama, which is near Talladega, Alabama for those of you that follow racing.  Frank’s facility is still pretty spartan, as it appears that construction and additions are a daily event.  But, the layout is pretty ingenious as he offers a training area and a public range area to the local community.  Frank is going to have a world class training facility. Continue reading

SSI Knives: Special Circumstances Require Special Tools

SSI Maleficus. Photo courtesy SSI website.

I’m a gun guy. Like most “gun guys”, I tend to focus mostly on guns, with mild amusement found in other forms of self-defense tools. Most “other than guns” items I have come across barely get me to raise an eyebrow, let alone warrant spreading the word among my friends, let alone spreading the word via the internet. However, a few months ago, I came across a custom knife maker who was enough different than others that not only did it catch my eye, intrigue my curiosity, and help lighten my wallet; but it has also proven to be quite functional in my layered protection program. At last count, I had somewhere around  30-40 high end folding knives, another 10-15 fixed blade field knives, and at least 5-10 small fixed blades for concealed carry. Of those, no less than 5 are full custom knives by some of the bigger names in knife making today. Still, none were really so unique as to urge me to spread the word about them. Continue reading

Quick Peek, A First Look at the Surefire P3X Tactical

 

In the computer world there is an unofficial “law” first coined by Intel co-Founder Gordon E. Moore, that basically states that the amount of semi-conductors placed on a silicon chip (how much information that can be processed) will double every two years. The guys at Surefire must be in to computers, because just as I was getting used to my 500 Lumen fury and my 750 Lumen R1 Lawman, they upset the status quo with the new 1,000 Lumen P3X Tactical. I know that some other companies have crossed the 1,000 Lumen threshold already, but I trust that Surefire is going to work every time I press the button, that’s not something I can say of some of the after market add ons and competitors that I’ve had experience with. Continue reading

Emerson Knives

Emerson CQC7 and CQC8 showing their wear from use, as they should.

I remember growing up watching my grandfather pull out his Case pocket knife regularly to do any myriad of tasks. I remember getting my first pocket knife and carrying it with me everywhere I was allowed and some places I wasn’t. A knife in your pocket just becomes part of your routine, just like carrying a wallet or your car keys. Fast forward to joining the military and getting to my first command, I was introduced to Emerson knives. Half my platoon seemed to carry them, all well worn and treated like prized possessions. Of course wanting to emulate my mentors I purchased my first Emerson knife about eight years ago and haven’t looked back. I have been issued, carried and used knives from just about every quality manufacturer out there, each one making its way into my pocket for a short time only to be replaced by an Emerson again.

Known as one of the elite hard-use knives on the market, Ernest Emerson started Emerson knives in 1979 and since the company has grown to its current state. Offering a large variety of different size and style folding and fixed blade knives, Emerson’s style shows their intent for their knives to be used with their black handles and basic finish options. While Ernest still makes full custom knives, the company focuses on their factory offerings. Emerson also runs a training center for self defense both with knives and without. Another thing emerson is known for is their patented “wave” feature, which is a hook on top of the blade allowing for one handed opening when drawing from a pocket or pouch. All their factory offerings feature G10 epoxy handles, 154cm steel blades and Titanium locks. Finishes offered are black and satin blades with most models being offered in serrated and non serrated versions. Recent developments has led Emerson to do a Multi-tool as well called the EDC, adding to their line and offering another great option to the market owned by Leatherman, SOG and Gerber.

I have owned at least six different emerson knives in the last eight years, sadly losing a couple over time. Currently I’m running a CQC7 and CQC8 with black blades on a regular rotation depending what i’m doing. The CQC7 is a medium sized tanto folding knife and the smallest of my Emersons but seems to be the one I tend to carry the most. Their slim profile allows for very comfortable daily carry. This is a big thing for me as many “hard use” knives on today’s market seem to be built so if you attached a chain to them you could use them as a boat anchor. This is not the case with Emersons, even their larger models are slim and fairly light making daily carry painless. I cannot say enough good things about their customer service, always being treated amazingly well. I will never say a company is the ONLY way to go but an Emerson Knife will be a regular companion of mine for the foreseeable future. New “high speed” knives come to the market regularly touting feature or options that nobody even knew they needed. The true test is to put out a product that lasts and built for a very demanding end user. Emerson has been and will continue to be used by the worlds elite military and law enforcement units for that reason.

For more information:

http://emersonknives.com

First Look: Lone Wolf Distributors Armorer Tool/Knife

I must admit, I first learned of the Lone Wolf Distributors Armorer Tool/Knife by seeing a banner advertisement on our buddy Caleb’s website GunNuts.Net. In short, this tool is really a modified Spyderco Endura 4, with an Emerson Wave Opener and a 3/32-inch punch built into it. At first blush, it doesn’t seem like much, but this is truly the knife that any gun person should always have on them, especially on the practice range.

All my 1911s are set up so that they can be disassembled without tools, but the punch makes it significantly easier to disassemble the slide. This comes in handy when I need to make a quick adjustment of extractor tension, which happens much more frequently than I would like. Glock people also know that this size punch will completely take down their favorite pistol. Having the punch built into an everyday carry knife ensures this handy punch size will be with you at all times. Continue reading

P224-9 SAS Hot Ammo – Update #4

I decided to use day three on the range to prove out the gun using a variety of self defense ammunition. It was an expensive trip.

I decided to use my third day on the range with the P224-9 to run off a bunch of self defense ammunition I have been sitting on for quite a while.  I wanted to know for sure that it will run with the hotter loads.  All totaled I ran another 2750 rounds through the gun and it is definitely time for a new recoil spring.  The break down is as follows:

500 rounds of 147gr Hydra Shok

250 rounds of Corbon DPX 115gr +P

500 rounds of Speer GDHP 124gr +P

500 rounds of Ranger T Series 124gr +P

1000 Rounds of M882 Ball

Continue reading

P224-9 The Conversion and More Range Time – Update #3

The start of another good day. 1000 rounds and a free range of steel targets. But that DAK trigger has got to go.

Day three started with a Delta Point on my P224-9 and 1000 rounds of 100gr frangible ammo.  While sighting in the red dot, I decided that I had enough of the DAK trigger system.  Don’t get me wrong, it is a great system, but it is just not for me.  I walked into the gunsmith room at the Academy and begged our Martian Ninja Helicopter Pilot/ Gunsmith Brett Martineau to make it better.  10 minutes later I had a DA/SA SRT version of the P224-9 in my hand and was ready for the remaining ammo. Continue reading

P224-9 SAS Comparisons and a Nit – Update #5

A problem is a problem, regardless of how easy it is to fix. This mag base was just too tight.

While it is a very minor problem and was easily fixed, I did run into a snag with the 12 round P224 magazines seating correctly while running the gun.  It was a problem particularly if I was doing a reload with retention where the slide was in complete lock up.  It turns out that the base pads on both magazines were slightly oversized.  If you look at the picture above, you can see a very tight fit, especially in the area where the base pad steps up to meet the grip shell.  I found myself periodically having to smack the bottom of the magazine to get it seated correctly.

Problem solved. But should it have happened in the first place?

I did not have to take much off of the base pads to get them to work better.  A few passes with a smooth cut file and I was done.  They insert properly in a single motion now and have only  slight bit of movement in lock up.

The rest of this update is a comparison in pictures.  According to each company’s web site, the P224-9 SAS weights 29 ounces dry; the Glock 19 weighs 21.6 ounces empty: the Glock 26 weighs 19.75 ounces empty and the M&P9C weighs 21.7 ounces dry.

P224 next to the M&P9C

P224 next to the Glock Model 26. (it is actually a G27 because one was handy, but they are the same size.)

P224 next to a Glock 19.

I have one more range session planned for the P224-9 and I will post those results once I am done.  I plan to go only to 5000 rounds with this gun.  I do not find anything smaller than a G19 or a  P228/9 comfortable to shoot for extended periods of time and I have no real desire to push it.

SIG P224 SAS

The SIG SAUER P224-9-SAS-DAK is one of several variants of the new P224 branch of sub-compact SIG SAUER Classic Line Pistols.

The new SIG SAUER P224 pistols are now making it to the market on a regular basis and this one is mine.  Holding true to all the quality, accuracy and ergonomic features of the SIG SAUER Classic Line pistol family, the P224 is the first of the sub-compacts for this line.

About the size of a G26, the 9mm P224 holds 12+1 in 9mm and 10+1 for the .40 and .357 SIg variants.  This particular model came with 2, 12 round magazines.  An added feature of the P224 is that it will accept and run the larger magazines from the P226 and P229 pistols.  A sleeve is in development to fill the gap between the mag base and the end of the grip for the P229 magazines.

The SAS, or SIG Anti-Snag, model has had all the sharp edges blended and since it is a DAK it lacks the de-cocking lever assembly. The DAK or, Double Action Kellerman, is a DA trigger system that runs at about 5.5# and does not stack.  It makes for a very smooth and consistent DA only trigger action. Combine that with the rounded butt, E2 Grip System, smooth edges and minimized slide catch lever and you have a very slick and concealable package.  Knowing that I can carry 30+1 rounds of 9mm between the gun and a single spare P226 magazine gives me added confidence in the gun overall.

There are several variations of the P224.  They, along with all the pertinent specs, can be found here on the SIG SAUER web site.

I’ll be shooting and hopefully carrying this gun over the next few months and will post updates as I progress.

ROBAR/10-8/MSW GLOCK17-PART 4

Robar/10-8/MSW Glock 17 After 2000 + Rounds

This 4th and final installment of the Robar Glock review will focus on the overall modifications and how they effect the performance of the pistol. For those who are looking for a “I ran it over with my 4×4 and then tossed it out of a helicopter review” you will be disappointed. However the pistol is a working gun and is not a “Safe Queen”.

Since receiving my Robar modified Glock almost three months ago, I have carried it everyday, taught 6 classes with it, which included demonstration drills, shot 2 IDPA matches and shot it during several training sessions and allowed several students to fire it as well. During that time the pistol has fired over 2000 rounds, of which over 1500 have been reloaded ammunition.

Continue reading