THE USMC M45 CQBP: COLT IS BACK! (PART 1)

Colt CQBP displayed at SHOT Show.

Colt was recently awarded their first pistol contract on a 1911 pistol since the early 1950’s.  The United States Marine Corps awarded Colt Defense a $22.5M contract for the 45 caliber pistols slated for elite special operations units.  I was contacted in November to develop a Program of Instruction (POI) on the pistol, now called the M45 CQBP.  Accordingly, I made arrangements with Greg Rozum of Colt to work on the pistol.

The M45 CQBP is based on the Colt Rail Gun, and from that model a number of changes and improvements were made. After initial units were submitted, extensive testing was done and based on initial findings, improvements were made by the Colt Team headed up by Greg. Colt Range Master Patrick Rittmon also provided design help. Patrick is a Marine and has an extensive background in Marine Corps weapons platforms geared for serious social encounters.

Greg spent a lot of time explaining what improvements were made and why they evolved. Such changes included moving the front slide serrations farther toward the muzzle and making the serrations wider instead of narrower, strengthening the dust cover and 1913 rail to meet USMC durability requirements.  Internal parts have been tumbled and electro nickel-plated to eliminate the need for polishing. A ten pistol interchangeability test, along with an endurance test, had to be performed to meet standards.

Dual recoil springs with a shorter recoil guide have replaced the standard “GI style” setup we have become accustomed to. The dual spring setup was designed to dampen the recoil physics to prevent damage to the frame and slide in addition to extending the life on component parts.

With slide partially removed, the dual spring system is visible.

One of the design goals was to minimize hand fitting and filing, with the exception of the thumb safety. By and large, Colt has met this design goal.

I was skeptical of the Wilson 47CB Mags. I have run any number of the Wilson magazines, but this one is different. The spring is stiff, the magazine uses a round follower and holds seven rounds.

I made it clear to Greg that I wanted to shoot the pistol and run it hard. At my own agency, I was forced to adopt a duty pistol that I had no part in selecting. We quickly discovered problems, which eventually led to failures occurring in the field. Ultimately, the pistols were replaced. Therefore, I am always skeptical of new guns, but I digress…

Greg and I went into the factory and picked up a random CQBP off a rack of new pistols. The protective wrap on the slide was still in place.  Pat Rittmon then met us and handed me a box containing 29 fully loaded Wilson 47 CB mags. “I can shoot these?” I asked Pat and Greg. Pat grinned and said, “Go ahead.” Pat had a mirthful look on his face reminiscent of the cat that ate the canary. In Pat’s case, he was the lion who just ambushed all the vultures!

CQBP prior to shooting on the range.

Greg put up a target and explained that the pistol had not been zeroed yet. Normally after being built they are brought to the range for test firing and sight in. I peeled the wrapper off and quickly examined the pistol. Greg and Pat had other business to attend to so they left me to my devices.

I began shooting the pistol and immediately noticed how soft shooting this pistol felt. Settling into a steady rhythm I slowly depleted the box of magazines I was given.  I finished and the first thing that struck me was that the CQBP had suffered no malfunctions. In my 32 years I have never had a pistol not suffer a malfunction right out of the gate. This pistol was given to me right off the line. I didn’t break it down or lubricate it. I shot this pistol rapidly and heated it up.  When I finished up, I noticed that my elbows weren’t aching.  Those of you who have been active in the LE/MIL field know what I am talking about – the Tylenol bottle in the range bag is not for show.

I field stripped it the pistol, gave it a once over, wiped it down and then put it back together. Greg and Pat returned and Greg asked how it went. ” No malfunctions whatsoever.” Greg looked into the box and said, “Oh, you shot them all?” I told them both that I was somewhat impressed by the performance of the pistol and the mags.  I expect most pistols to have a few hiccups right out of the gate. Then once they settle in and run, it really isn’t a big deal. If they fail repeatedly, that’s when I become concerned.  I wanted to clean the pistol but Greg said no, he has people for that. We spoke in depth over lunch on the design and improvements made on this platform.

After lunch we went back into the factory and Greg brought me to the CQBP line and selected another pistol. I wanted to perform an in-depth detail strip. I warned Greg that I was going to “bang” on this pistol.

“Go ahead Frank; it was built for the Marine Corps!” I whipped out a 10-8 Armorer Block. Greg hadn’t seen it before, so we discussed the merits of the Armorer Block. I explained Dean Caputo had turned me onto to it. This has proven to be an invaluable tool in my classes and is now standard in the Colt Armorer class tool kits. Pay attention because you’ll see this again.

I had hoped to work on the pistol that I had shot. I have extensive experience with Cerakote. It is always easier to take apart a pistol finished in Cerakote after shooting, as the excess material loosens up. After taking photos to develop a Power Point Presentation, Greg went over the parts with me and patiently answered all of my questions. I put the pistol back together and we returned it to the Pistol section. Greg and I returned to his office and sent me on my way with a number of PDF files containing diagrams to assist in developing the Power Point.

It was a very productive trip to the Colt factory, and I would like to extend my appreciation to Greg and Pat for their assistance.  I am definitely interested in purchasing this pistol when it becomes available!

 

This entry was posted in 1911 by Frank Moody. Bookmark the permalink.

About Frank Moody

Frank Moody is a 32-year LEO veteran on a major Northeast Agency. He has worked Patrol, Traffic Motorcycle, Narcotics Organized Crime, Fugitive Operatons and SWAT. During his career, he has become an authority in Firearms Tactical Training and is a Force on Force instructor. Frank is a Factory Armorer Instructor on AR/M16/M4 platforms, the 1911 Pistol and the 203 Grenade Launcher.

22 thoughts on “THE USMC M45 CQBP: COLT IS BACK! (PART 1)

  1. The stock screws appear to have a larger than standard head diameter. Any reason as to why?

    The dual recoil-spring set-up surprises me. What is the combined compression weight of the set-up?

  2. My assumption on those grip screws is that they have a large enough slot for you to remove them with the rim of a .45 casing, so you don’t need a screwdriver. The screws we tend to see these days are for show and you can’t get a case rim in their slots.

  3. Perhaps (on the stock screws), although everyone carries a Leatherman or similar these days.

    Also, I think that the choice of a long trigger on a general issue 1911 is odd. It is easier for a long-fingered user to run a short trigger than vice versa. A short trigger would leave more room in the triggerguard for a gloved finger too.

    • No details – price, model type, etc. – are yet available from Colt. Much is still getting worked out, but rest assured we will get that info out as soon as it is official.

  4. I’ve never had any of 20 Glock pistols, 2 BHPs, a P7, an M&P, couple dozen S&W revolvers or 9 out of 10 1911s have a problem out of the gate. It’s a good looking pistol and ran well. How did it group?

  5. Are they tuning the extractor on every gun? Or did they figure something else out?

  6. I, too, am interested to see more details on the recoil spring system and if it will be of benefit and available on the aftermarket.

    • The recoil system was developed specifically to help the test guns withstand the beating from the +P rated duty loading specified in the contract, as well as the long interval required between spring changes. Unless you are subjecting your pistol to the same use requirements, I think you will be plenty well served with the traditional spring system.

  7. An old soldier not a Marine, but this may have to be my first pistol with a rail. On the early pictures of the approved gun they showed a short trigger ( better when running with gloves which the military does or when dealing with shooters with small hands) while later pics show a long trigger?
    My opinion is a long finger can always reach a short trigger but the reverse is not always true. Should have stuck with a short trigger

  8. Hilton, there was some in-depth internet reporting on http://www.m4carbine.net, including some fairly detailed images of at least one of the test guns that displayed catastrophic cracking in several locations as I recall, and I believe that none of the test protocol guns were able to complete more than 10K or 12K rounds in testing before essentially self-destructing…

    Are these “final”/production guns different (i.e., modified to correct the deficiencies of the test guns) or are they one and the same?

    Best, Jon Stein

    • The pictures and comments on the Internet do not tell the whole story. The contract guns were modified to meet requirements.

    • Those photos and the subsequent reporting were leaked from the contract testing. There is a reason that testing for contracts is usually closed from outside scrutiny, as those pics were out of context and not all of the information was presented. The modifications detailed in the article here were in response to failures in the early cycles of the protocol.

  9. Hilton and Tim-that is most excellent news; perhaps this variant really will turn out to be the “holy grail” of the 1911 in terms of both reliability and durability. I will be following your comments (and hopefully long-term T&E) results on this closely. It will also be interesting to see how the commercial version of this stacks up with this gun-I’m hoping that the only thing of significant deviation between the two will be the rollmarkings…

    Best, Jon Stein

  10. All in all, I am definitely going to add one of these to the pile. Several of the MSW staff are already in possession of samples with more to come. More detailed reports to follow!

  11. Will colt at some point detail it on its website, offer it through a distributor or what sales channels? People want these and colt should be talking it up more. Some time ago I saw a very nice limited run colt done for I believe wound warrior project or some such but never advertised seemed a hush hush we only made afew sort of thing. Colt has a winner here but if history is any indication they will figure out a way to snatch defeat from the jaws of victory as far as the commercial market goes

  12. I served in the military as a Navy gunner’s mate and small arms were my specialty.
    The .45 was even then my sidearm of choice over the 9mm the Navy adopted. In my six years of shooting it I never had any jam ups or misfires due to the weapon. Sometime misfires from old and bad ammo did occur but not as a result of the pistol. However I am glad to see some modifications have been made to improve its accuracy. That was my only complaint about it. It seemed the more it was shot over a period of time it did lose some of its accuracy.

  13. I am happy to report my local dealer has mine on order! Mr Yam made reference to the double recoil spring life- any specifics on what the replacement interval might be

    • There’s no real data available on that dual recoil spring system as it is a new part that has not yet been fielded. If I were running it, I’d still replace it on the same interval as a single spring setup (3000 rds). It also remains to be seen if the parts will even be readily available for replacement.

Comments are closed.